WEKO3
アイテム
{"_buckets": {"deposit": "2418906f-4843-4db4-9855-b0db2317eaa2"}, "_deposit": {"created_by": 3, "id": "4579", "owners": [3], "pid": {"revision_id": 0, "type": "depid", "value": "4579"}, "status": "published"}, "_oai": {"id": "oai:kyutech.repo.nii.ac.jp:00004579", "sets": ["24"]}, "author_link": ["16515", "16513", "16514", "16516", "3665"], "item_21_biblio_info_6": {"attribute_name": "書誌情報", "attribute_value_mlt": [{"bibliographicIssueDates": {"bibliographicIssueDate": "2016-03-04", "bibliographicIssueDateType": "Issued"}, "bibliographicIssueNumber": "2", "bibliographicPageEnd": "310", "bibliographicPageStart": "303", "bibliographicVolumeNumber": "56", "bibliographic_titles": [{"bibliographic_title": "ISIJ International"}]}]}, "item_21_description_4": {"attribute_name": "抄録", "attribute_value_mlt": [{"subitem_description": "Ceramic rollers can be used in the heating furnace conveniently because of its high temperature resistance. The new roller consists of ceramic sleeve and steel shaft connected only under a small shrink fitting ratio because of the brittleness. In the previous study, simulation of coming out of the shaft from the sleeve was performed, but only small number of loading cycle can be considered because of large computational time. To analyze the coming out problem more efficiently, in this paper, the two-dimensional shrink fitted structures are considered. Then, the effects of the magnitude of load and shrink fitting ratio are investigated under large number of loading cycle. Finally, the coming out mechanism is discussed for larger number of cycles by focusing on the shear stress and displacement at the joint end. The coming out occurs when the negative shear stress is unstable. On the other hand, the coming out does not occur when the positive shear stress is stable with little fluctuation.", "subitem_description_type": "Abstract"}]}, "item_21_description_60": {"attribute_name": "資源タイプ", "attribute_value_mlt": [{"subitem_description": "Journal Article", "subitem_description_type": "Other"}]}, "item_21_link_62": {"attribute_name": "研究者情報", "attribute_value_mlt": [{"subitem_link_text": "https://hyokadb02.jimu.kyutech.ac.jp/html/10_ja.html", "subitem_link_url": "https://hyokadb02.jimu.kyutech.ac.jp/html/10_ja.html"}]}, "item_21_publisher_7": {"attribute_name": "出版者", "attribute_value_mlt": [{"subitem_publisher": "社団法人日本鉄鋼協会"}]}, "item_21_relation_12": {"attribute_name": "DOI", "attribute_value_mlt": [{"subitem_relation_type": "isIdenticalTo", "subitem_relation_type_id": {"subitem_relation_type_id_text": "info:doi/10.2355/isijinternational.ISIJINT-2015-558", "subitem_relation_type_select": "DOI"}}]}, "item_21_relation_14": {"attribute_name": "情報源", "attribute_value_mlt": [{"subitem_relation_name": [{"subitem_relation_name_text": "https://doi.org/10.2355/isijinternational.ISIJINT-2015-558"}], "subitem_relation_type_id": {"subitem_relation_type_id_text": "https://doi.org/10.2355/isijinternational.ISIJINT-2015-558", "subitem_relation_type_select": "DOI"}}]}, "item_21_rights_13": {"attribute_name": "権利", "attribute_value_mlt": [{"subitem_rights": "Copyright (c) 2016 by The Iron and Steel Institute of Japan "}]}, "item_21_select_59": {"attribute_name": "査読の有無", "attribute_value_mlt": [{"subitem_select_item": "yes"}]}, "item_21_source_id_10": {"attribute_name": "書誌レコードID", "attribute_value_mlt": [{"subitem_source_identifier": "AA10680712", "subitem_source_identifier_type": "NCID"}]}, "item_21_source_id_8": {"attribute_name": "ISSN", "attribute_value_mlt": [{"subitem_source_identifier": "0915-1559", "subitem_source_identifier_type": "ISSN"}, {"subitem_source_identifier": "1347-5460", "subitem_source_identifier_type": "ISSN"}]}, "item_21_text_36": {"attribute_name": "著者所属", "attribute_value_mlt": [{"subitem_text_value": "Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology"}, {"subitem_text_value": "Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology"}, {"subitem_text_value": "Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology"}, {"subitem_text_value": "Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology"}, {"subitem_text_value": "Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology"}]}, "item_21_text_63": {"attribute_name": "連携ID", "attribute_value_mlt": [{"subitem_text_value": "5598"}]}, "item_21_version_type_58": {"attribute_name": "著者版フラグ", "attribute_value_mlt": [{"subitem_version_resource": "http://purl.org/coar/version/c_970fb48d4fbd8a85", "subitem_version_type": "VoR"}]}, "item_creator": {"attribute_name": "著者", "attribute_type": "creator", "attribute_value_mlt": [{"creatorAffiliations": [{"affiliationNameIdentifiers": [], "affiliationNames": [{"affiliationName": "", "affiliationNameLang": "ja"}]}], "creatorNames": [{"creatorName": "Noda, Nao-Aki", "creatorNameLang": "en"}, {"creatorName": "野田, 尚昭", "creatorNameLang": "ja"}, {"creatorName": "ノダ, ナオアキ", "creatorNameLang": "ja-Kana"}], "familyNames": [{"familyName": "Noda", "familyNameLang": "en"}, {"familyName": "野田", "familyNameLang": "ja"}, {"familyName": "ノダ", "familyNameLang": "ja-Kana"}], "givenNames": [{"givenName": "Nao-Aki", "givenNameLang": "en"}, {"givenName": "尚昭", "givenNameLang": "ja"}, {"givenName": "ナオアキ", "givenNameLang": "ja-Kana"}], "nameIdentifiers": [{"nameIdentifier": "3665", "nameIdentifierScheme": "WEKO"}, {"nameIdentifier": "40172796", "nameIdentifierScheme": "e-Rad", "nameIdentifierURI": "https://nrid.nii.ac.jp/ja/nrid/1000040172796"}, {"nameIdentifier": "7202782903", "nameIdentifierScheme": "Scopus著者ID", "nameIdentifierURI": "https://www.scopus.com/authid/detail.uri?authorId=7202782903"}, {"nameIdentifier": "0000-0002-6067-3122", "nameIdentifierScheme": "ORCiD", "nameIdentifierURI": "https://orcid.org/0000-0002-6067-3122"}]}, {"creatorNames": [{"creatorName": "Xu, Yuanming"}], "nameIdentifiers": [{"nameIdentifier": "16513", "nameIdentifierScheme": "WEKO"}]}, {"creatorNames": [{"creatorName": "Suryadi, Dedi"}], "nameIdentifiers": [{"nameIdentifier": "16514", "nameIdentifierScheme": "WEKO"}]}, {"creatorNames": [{"creatorName": "Sano, Yoshikazu"}], "nameIdentifiers": [{"nameIdentifier": "16515", "nameIdentifierScheme": "WEKO"}]}, {"creatorNames": [{"creatorName": "Takase, Yasushi"}], "nameIdentifiers": [{"nameIdentifier": "16516", "nameIdentifierScheme": "WEKO"}]}]}, "item_files": {"attribute_name": "ファイル情報", "attribute_type": "file", "attribute_value_mlt": [{"accessrole": "open_date", "date": [{"dateType": "Available", "dateValue": "2016-09-20"}], "displaytype": "detail", "download_preview_message": "", "file_order": 0, "filename": "ISIJINT56_558.pdf", "filesize": [{"value": "2.1 MB"}], "format": "application/pdf", "future_date_message": "", "is_thumbnail": false, "licensetype": "license_free", "mimetype": "application/pdf", "size": 2100000.0, "url": {"label": "ISIJINT56_558.pdf", "url": "https://kyutech.repo.nii.ac.jp/record/4579/files/ISIJINT56_558.pdf"}, "version_id": "25dea876-1c1d-499f-91bd-f06fa730ce30"}]}, "item_keyword": {"attribute_name": "キーワード", "attribute_value_mlt": [{"subitem_subject": "ceramic roller", "subitem_subject_scheme": "Other"}, {"subitem_subject": "coming out mechanism", "subitem_subject_scheme": "Other"}, {"subitem_subject": "shrink fitting", "subitem_subject_scheme": "Other"}, {"subitem_subject": "finite element method", "subitem_subject_scheme": "Other"}]}, "item_language": {"attribute_name": "言語", "attribute_value_mlt": [{"subitem_language": "eng"}]}, "item_resource_type": {"attribute_name": "資源タイプ", "attribute_value_mlt": [{"resourcetype": "journal article", "resourceuri": "http://purl.org/coar/resource_type/c_6501"}]}, "item_title": "Coming out Mechanism of Steel Shaft from Ceramic Sleeve", "item_titles": {"attribute_name": "タイトル", "attribute_value_mlt": [{"subitem_title": "Coming out Mechanism of Steel Shaft from Ceramic Sleeve"}]}, "item_type_id": "21", "owner": "3", "path": ["24"], "permalink_uri": "http://hdl.handle.net/10228/5798", "pubdate": {"attribute_name": "公開日", "attribute_value": "2016-09-20"}, "publish_date": "2016-09-20", "publish_status": "0", "recid": "4579", "relation": {}, "relation_version_is_last": true, "title": ["Coming out Mechanism of Steel Shaft from Ceramic Sleeve"], "weko_shared_id": 3}
Coming out Mechanism of Steel Shaft from Ceramic Sleeve
http://hdl.handle.net/10228/5798
http://hdl.handle.net/10228/5798171d7d98-c4fa-4f16-84c4-c564655ec6e6
名前 / ファイル | ライセンス | アクション |
---|---|---|
ISIJINT56_558.pdf (2.1 MB)
|
|
Item type | 学術雑誌論文 = Journal Article(1) | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
公開日 | 2016-09-20 | |||||||||||
資源タイプ | ||||||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||||||
資源タイプ | journal article | |||||||||||
タイトル | ||||||||||||
タイトル | Coming out Mechanism of Steel Shaft from Ceramic Sleeve | |||||||||||
言語 | ||||||||||||
言語 | eng | |||||||||||
著者 |
野田, 尚昭
× 野田, 尚昭
WEKO
3665
× Xu, Yuanming× Suryadi, Dedi× Sano, Yoshikazu× Takase, Yasushi |
|||||||||||
抄録 | ||||||||||||
内容記述タイプ | Abstract | |||||||||||
内容記述 | Ceramic rollers can be used in the heating furnace conveniently because of its high temperature resistance. The new roller consists of ceramic sleeve and steel shaft connected only under a small shrink fitting ratio because of the brittleness. In the previous study, simulation of coming out of the shaft from the sleeve was performed, but only small number of loading cycle can be considered because of large computational time. To analyze the coming out problem more efficiently, in this paper, the two-dimensional shrink fitted structures are considered. Then, the effects of the magnitude of load and shrink fitting ratio are investigated under large number of loading cycle. Finally, the coming out mechanism is discussed for larger number of cycles by focusing on the shear stress and displacement at the joint end. The coming out occurs when the negative shear stress is unstable. On the other hand, the coming out does not occur when the positive shear stress is stable with little fluctuation. | |||||||||||
書誌情報 |
ISIJ International 巻 56, 号 2, p. 303-310, 発行日 2016-03-04 |
|||||||||||
出版社 | ||||||||||||
出版者 | 社団法人日本鉄鋼協会 | |||||||||||
DOI | ||||||||||||
関連タイプ | isIdenticalTo | |||||||||||
識別子タイプ | DOI | |||||||||||
関連識別子 | info:doi/10.2355/isijinternational.ISIJINT-2015-558 | |||||||||||
NCID | ||||||||||||
収録物識別子タイプ | NCID | |||||||||||
収録物識別子 | AA10680712 | |||||||||||
ISSN | ||||||||||||
収録物識別子タイプ | ISSN | |||||||||||
収録物識別子 | 0915-1559 | |||||||||||
ISSN | ||||||||||||
収録物識別子タイプ | ISSN | |||||||||||
収録物識別子 | 1347-5460 | |||||||||||
著作権関連情報 | ||||||||||||
権利情報 | Copyright (c) 2016 by The Iron and Steel Institute of Japan | |||||||||||
キーワード | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | ceramic roller | |||||||||||
キーワード | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | coming out mechanism | |||||||||||
キーワード | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | shrink fitting | |||||||||||
キーワード | ||||||||||||
主題Scheme | Other | |||||||||||
主題 | finite element method | |||||||||||
出版タイプ | ||||||||||||
出版タイプ | VoR | |||||||||||
出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||||||
査読の有無 | ||||||||||||
値 | yes | |||||||||||
研究者情報 | ||||||||||||
https://hyokadb02.jimu.kyutech.ac.jp/html/10_ja.html | ||||||||||||
連携ID | ||||||||||||
5598 | ||||||||||||
資料タイプ | ||||||||||||
内容記述タイプ | Other | |||||||||||
内容記述 | Journal Article | |||||||||||
著者所属 | ||||||||||||
Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology | ||||||||||||
著者所属 | ||||||||||||
Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology | ||||||||||||
著者所属 | ||||||||||||
Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology | ||||||||||||
著者所属 | ||||||||||||
Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology | ||||||||||||
著者所属 | ||||||||||||
Dept. of Mechanical and Control Engineering, Kyushu Institute of Technology | ||||||||||||
情報源 | ||||||||||||
識別子タイプ | DOI | |||||||||||
関連識別子 | https://doi.org/10.2355/isijinternational.ISIJINT-2015-558 | |||||||||||
関連名称 | https://doi.org/10.2355/isijinternational.ISIJINT-2015-558 |