WEKO3
アイテム
Single PCB sensor-based output current reproduction for three-phase inverter systems
http://hdl.handle.net/10228/0002000896
http://hdl.handle.net/10228/0002000896ba9e4a70-99e5-4f7d-8fcd-6a0ab6fc5e4a
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
nperc244.pdf (9.3 Mb)
|
|
| アイテムタイプ | 学術雑誌論文 = Journal Article(1) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 公開日 | 2024-07-05 | |||||||||||
| 資源タイプ | ||||||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||||||
| 資源タイプ | journal article | |||||||||||
| タイトル | ||||||||||||
| タイトル | Single PCB sensor-based output current reproduction for three-phase inverter systems | |||||||||||
| 言語 | en | |||||||||||
| 言語 | ||||||||||||
| 言語 | eng | |||||||||||
| 著者 |
Bayarkhuu, B.
× Bayarkhuu, B.
× Bat-Ochir, B.
× Dugarjav, B.
× 大村, 一郎 |
|||||||||||
| 抄録 | ||||||||||||
| 内容記述タイプ | Abstract | |||||||||||
| 内容記述 | This study proposes a practical output current measurement system in a three-phase inverter with a single printed circuit board (PCB) Rogowski coil sensor inserted in the bus between the DC-link capacitor and the power semiconductor module. This system demonstrates its advantage over conventional output current sensors, such as the Hall effect current sensors, in terms of the size, weight, operation temperature and cost. The system can be applied to 6-in-1 power modules as it does not require sensors in the inverter phase legs. In our previous works, we have developed a method called “envelope tracking”, which is used in this system as well. This method traces the switching current instead of the output current to reproduce the output current signal in real-time. Envelope tracking successfully reproduced the output current waveform for single phase inverters under certain conditions. However, a large error is observed in the three-phase inverter demonstration under a high switching frequency (narrow pulse) or when the switching of different phases overlap each other. These errors must be completely suppressed to implement the system for feedback control in three-phase inverters. In this study, a new analog basis output current waveform reproduction system is introduced to suppress the above mentioned errors. This system is implemented in a three-phase insulated-gate bipolar transistor (IGBT) inverter and successfully reproduces the output current with a single PCB sensor inserted between a 6-in-1 IGBT power module and DC-link capacitor, operating under a switching frequency of 3.5–7.0 kHz and output current of 6 A with DC-link voltage of 150 V. |
|||||||||||
| 言語 | en | |||||||||||
| 書誌情報 |
en : Power Electronic Devices and Components 巻 7, p. 100053, 発行日 2023-12-22 |
|||||||||||
| 出版社 | ||||||||||||
| 出版者 | Elsevier | |||||||||||
| 言語 | en | |||||||||||
| DOI | ||||||||||||
| 識別子タイプ | DOI | |||||||||||
| 関連識別子 | https://doi.org/10.1016/j.pedc.2023.100053 | |||||||||||
| ISSN | ||||||||||||
| 収録物識別子タイプ | EISSN | |||||||||||
| 収録物識別子 | 2772-3704 | |||||||||||
| 著作権関連情報 | ||||||||||||
| 権利情報Resource | http://creativecommons.org/licenses/by/4.0/ | |||||||||||
| 権利情報 | Copyright (c) 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). | |||||||||||
| キーワード | ||||||||||||
| 主題Scheme | Other | |||||||||||
| 主題 | Current reproduction | |||||||||||
| キーワード | ||||||||||||
| 主題Scheme | Other | |||||||||||
| 主題 | PCB | |||||||||||
| キーワード | ||||||||||||
| 主題Scheme | Other | |||||||||||
| 主題 | Rogowski coil | |||||||||||
| キーワード | ||||||||||||
| 主題Scheme | Other | |||||||||||
| 主題 | Three-phase inverter | |||||||||||
| 出版タイプ | ||||||||||||
| 出版タイプ | VoR | |||||||||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||||||
| 査読の有無 | ||||||||||||
| 値 | yes | |||||||||||
| 連携ID | ||||||||||||
| 値 | 12342 | |||||||||||
