@article{oai:kyutech.repo.nii.ac.jp:00002479,
 author = {Nagamoto, K and Kuwabara, Nobuo and 桑原, 伸夫 and Kawabata, M},
 journal = {2008 International Symposium on Electromagnetic Compatibility},
 month = {Sep},
 note = {The emissions from the power line communication (PLC) system should be investigated for the influence to the electromagnetic environment. The method of moment (MOM) has been studied to estimate the emitted electric field. However, the MOM is difficult to treat the dielectric material of the cable. This paper proposes the method of creating the wire grid model considering the dielectric material of the power line cable. The radius of the wire was determined from the per unit length inductance of the cable. The admittance is inserted between wires to present the effect of the dielectric material, and the value is determined from the admittance calculated by using the FEM based on the two-dimension model. The other admittance was inserted between each wire and ground and the value was also determined from the FEM results. The appliances were presented by T-type network based on the measurement results. The common mode input impedance and radiated magnetic field were measured and compared with the calculated one, and the evaluation indicated that the well agreement was obtained. A simple model of the indoor power line system was constructed and the radiated magnetic field was calculated. The evaluation was indicated that the calculation results almost agreed with the measured one. These results mean that the wire grid model is effective to estimate the radiated electromagnetic field from PLC system.},
 pages = {1--6},
 title = {Calculation of Emitted Magnetic Field Using Wire Grid Model Considering Dielectric Material of VVF Cable},
 year = {2008},
 yomi = {クワバラ, ノブオ}
}