@inproceedings{oai:kyutech.repo.nii.ac.jp:00004595,
 author = {小田部, エドモンド 荘司 and Otabe, Edmund Soji and Vyatkin, Vladimir S. and Kiuchi, Masaru and 木内, 勝 and Matsushita, Teruo and 松下, 照男 and Ni, Baorong and Kato, Takeshi and Nishimura, Takashi and Uetsuki, Ryota},
 book = {AIP Conference Proceedings},
 month = {Jan},
 note = {A Bi-2223 superconducting magnet for practical use in liquid nitrogen is designed and fabricated. Bi-2223 tapesprepared by ConTrolled Over Pressure (CT-OP) process are used for the winding, and the critical current at 77.3 K and self-field is in the range of 174–185 A. 28 double-pancake coils are resistively connected in series by copper terminals. Highcritical current tape is used for top and bottom double-pancake coils, since the magnetic field normal to the tape surface ishighest at the top and bottom of the magnet. Two iron plates at top and bottom of the magnet are used for reduction of thenormal component of magnetic field to the Bi-2223 tape, since the total performance of the magnet is determined by theminimum critical current at maximum normal magnetic field component to the tape. The inner bore diameter of the magnetis 92 mm. And the homogeneity of magnetic field of long-axis direction in 50 mmφ × 100 mm length is within 3%. Themaximum magnetic field at the center of the bore is over 1.0 T at 77.3 K., Proceedings of the Cryogenic Engineering Conference (2013) , June 17–21,  2013,  Anchorage, Alaska, USA},
 pages = {754--759},
 publisher = {AIP Publishing},
 title = {Fabrication of 1 T Bi-2223 Superconducting Magnet with 92 mm Bore Diameter at 77 K},
 volume = {1573},
 year = {2014},
 yomi = {オタベ, エドモンド ソウジ and キウチ, マサル and マツシタ, テルオ}
}