@inproceedings{oai:kyutech.repo.nii.ac.jp:00006192,
 author = {Shu,  J F and Yamaguchi, Tomiko and 山口, 富子},
 book = {IOP Conference Series: Materials Science and Engineering},
 issue = {1},
 month = {Mar},
 note = {The A1050/AZ31 clad materials were produced by vacuum roll bonding. The effects of rolling temperature and reduction rate on the interface of A1050/AZ31 clad materials were investigated, and the fracture behaviors of A1050/AZ31 interface were studied. A very thin intermetallic compound layer was formed at the A1050/AZ31 interface at rolling temperature of 350ºC and reduction rate of 25%. Therefore the A1050/AZ31 interface mainly was ductile fracture, and the average tensile strength of A1050/AZ31 interface reached the maximum (43MPa). When the rolling temperature was 450ºC and the reduction rate was 25%, the fracture occurred on the brittle intermetallic compound Al3Mg2 layer (thickness 7.68μm) and Al12Mg17 layer (thickness 1.95μm), mainly on Al3Mg2 layer, and the average tensile strength of A1050/AZ31 interface reached the minimum (0.61MPa)., 2019 International Conference on Advances in Materials, Mechanical and Manufacturing (AMMM 2019), 22–24 March 2019, Beijing, China},
 pages = {012031-1--012031-7},
 publisher = {IOP Publishing},
 title = {Bond characteristics of Al/Mg clad materials produced by vacuum roll bonding},
 volume = {576},
 year = {2019},
 yomi = {ヤマグチ, トミコ}
}