@article{oai:kyutech.repo.nii.ac.jp:00007319,
 author = {Miyazaki, Toshiki and 宮崎, 敏樹 and Hosokawa,  Tomoya and Yokoyama, Ken'ichi and 横山, 賢一 and Shiraishi,  Takanobu},
 journal = {Journal of Materials Science: Materials in Medicine},
 month = {Nov},
 note = {Ti–Zr alloys are expected to be novel biomaterials with low stress shielding owing to their lower Young’s moduli than pure Ti. The drawback of metallic biomaterials is that their bone-bonding abilities are relatively low. NaOH and heat treatments have been performed to provide Ti–50Zr with apatite-forming ability in the body environment, which is essential for bone bonding. However, the systematic compositional dependence of apatite formation has not been revealed. In the present study, NaOH treatment of Ti–Zr alloys with various compositions and bone-bonding abilities was assessed in vitro by apatite formation in simulated body fluid (SBF). The corrosion current density in NaOH aqueous solution and the amount of Na incorporated into the surface tended to decrease with increasing Zr content. The apatite-forming ability of the treated alloy significantly decreased when the Zr content was ≥60 atom%. This phenomenon is attributed to the (1) low OH content on the surface, (2) low Na incorporation into the treated alloy surface, which enhances apatite formation, and (3) low ability of P adsorption to the Ti–Zr alloy in SBF following Ca adsorption to trigger apatite nucleation. Although the adhesion of the titanate/zirconate layer formed on the surfaces to the substrates increased as Zr content increased, the adhesion between the apatite and the substrate was still low.},
 pages = {110-1--110-8},
 title = {Compositional dependence of the apatite formation ability of Ti–Zr alloys designed for hard tissue reconstruction},
 volume = {31},
 year = {2020},
 yomi = {ミヤザキ, トシキ and ヨコヤマ, ケンイチ}
}