WEKO3
アイテム
Failure Analysis for Coming out of Shaft from Shrink-Fitted Ceramics Sleeve
http://hdl.handle.net/10228/00006423
http://hdl.handle.net/10228/000064231c86a89e-0afe-480e-8eb7-4750dfee876f
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
efa_57_219.pdf (1.5 MB)
|
|
| Item type | 学術雑誌論文 = Journal Article(1) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 公開日 | 2017-11-01 | |||||||||||||
| 資源タイプ | ||||||||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||||||||
| 資源タイプ | journal article | |||||||||||||
| タイトル | ||||||||||||||
| タイトル | Failure Analysis for Coming out of Shaft from Shrink-Fitted Ceramics Sleeve | |||||||||||||
| 言語 | ||||||||||||||
| 言語 | eng | |||||||||||||
| 著者 |
野田, 尚昭
× 野田, 尚昭
WEKO
3665
× Sruyadi, Dedi× Kumasaki, Seiichi× 佐野, 義一× 高瀬, 康 |
|||||||||||||
| 抄録 | ||||||||||||||
| 内容記述タイプ | Abstract | |||||||||||||
| 内容記述 | This paper deals with failure analysis for coming out of the steel shaft from ceramic sleeve connected by shrink fitting. Only low shrink fitting ratio can be applied because of the brittleness of the ceramic sleeve. However, the steel shafts may be loosening out from the ceramic sleeve under such low shrink fitting ratio. In this study, the coming out behavior of the shaft during rotation is analyzed by the finite element method. The roller rotation is replaced by shifted load in the circumferential direction on the fixed roller. It is found that the load rotation can be approximated by the discrete load shifting at the interval angle θ0 = 12° within 1% error. The effect of the shrink fitting ratio on the coming out of the shaft is discussed as well as several other parameters, such as Young's modulus of the shaft, the friction coefficient, magnitude of the load, and geometry of the shaft. Furthermore, it is found that the shear stress distribution at the shrink-fitted area may be useful for evaluating whether the coming out occurs or not. | |||||||||||||
| 書誌情報 |
Engineering Failure Analysis 巻 57, p. 219-235, 発行日 2015-07-28 |
|||||||||||||
| 出版社 | ||||||||||||||
| 出版者 | Elsevier | |||||||||||||
| DOI | ||||||||||||||
| 関連タイプ | isVersionOf | |||||||||||||
| 識別子タイプ | DOI | |||||||||||||
| 関連識別子 | info:doi/10.1016/j.engfailanal.2015.07.016 | |||||||||||||
| NCID | ||||||||||||||
| 収録物識別子タイプ | NCID | |||||||||||||
| 収録物識別子 | AA11028313 | |||||||||||||
| ISSN | ||||||||||||||
| 収録物識別子タイプ | ISSN | |||||||||||||
| 収録物識別子 | 1350-6307 | |||||||||||||
| 著作権関連情報 | ||||||||||||||
| 権利情報 | Copyright (c) 2015 Elsevier Inc. All rights reserved. | |||||||||||||
| キーワード | ||||||||||||||
| 主題Scheme | Other | |||||||||||||
| 主題 | Coming out of shaft | |||||||||||||
| キーワード | ||||||||||||||
| 主題Scheme | Other | |||||||||||||
| 主題 | Ceramic sleeve | |||||||||||||
| キーワード | ||||||||||||||
| 主題Scheme | Other | |||||||||||||
| 主題 | Shrink fitting | |||||||||||||
| キーワード | ||||||||||||||
| 主題Scheme | Other | |||||||||||||
| 主題 | Finite element method | |||||||||||||
| キーワード | ||||||||||||||
| 主題Scheme | Other | |||||||||||||
| 主題 | Roller structure | |||||||||||||
| 出版タイプ | ||||||||||||||
| 出版タイプ | AM | |||||||||||||
| 出版タイプResource | http://purl.org/coar/version/c_ab4af688f83e57aa | |||||||||||||
| 査読の有無 | ||||||||||||||
| 値 | yes | |||||||||||||
| 研究者情報 | ||||||||||||||
| URL | https://hyokadb02.jimu.kyutech.ac.jp/html/10_ja.html | |||||||||||||
| 論文ID（連携） | ||||||||||||||
| 値 | 10283405 | |||||||||||||
| 連携ID | ||||||||||||||
| 値 | 5214 | |||||||||||||
| 情報源 | ||||||||||||||
| 識別子タイプ | DOI | |||||||||||||
| 関連識別子 | https://doi.org/10.1016/j.engfailanal.2015.07.016 | |||||||||||||
| 関連名称 | https://doi.org/10.1016/j.engfailanal.2015.07.016 | |||||||||||||
