WEKO3
アイテム
Study on coming out of the shaft from ceramic sleeve in terms of the residual displacement
http://hdl.handle.net/10228/00007016
http://hdl.handle.net/10228/00007016b330aa79-745f-474f-a2e7-e144115f8c91
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
1757-899X_372_1_012020.pdf (762.3 kB)
|
|
| アイテムタイプ | 会議発表論文 = Conference Paper(1) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 公開日 | 2019-02-15 | |||||||||||
| 資源タイプ | ||||||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_5794 | |||||||||||
| 資源タイプ | conference paper | |||||||||||
| タイトル | ||||||||||||
| タイトル | Study on coming out of the shaft from ceramic sleeve in terms of the residual displacement | |||||||||||
| 言語 | ||||||||||||
| 言語 | eng | |||||||||||
| 著者 |
Zhang, G W
× Zhang, G W× 野田, 尚昭
WEKO
3665
× 佐野, 義一× Sakai, H |
|||||||||||
| 抄録 | ||||||||||||
| 内容記述タイプ | Abstract | |||||||||||
| 内容記述 | Ceramic roller can be used in the heating furnace conveniently because of its high temperature resistance. However, the coming out of the shaft may often happen from the ceramic sleeve under repeated load. In this paper, a two-dimensional shrink fitted structure is considered by replacing the shaft with the inner plate and by replacing the sleeve with the outer plate. Based on the model with stopper, the FEM simulation is performed under alternate loading with certain intervals newly added. The analysis results show that the coming out failure can be explained from the residual displacement accumulation during these intervals. | |||||||||||
| 備考 | ||||||||||||
| 内容記述タイプ | Other | |||||||||||
| 内容記述 | 2018 International Conference on Material Strength and Applied Mechanics (MSAM 2018), 10–13 April 2018, Kitakyushu City, Japan | |||||||||||
| 書誌情報 |
IOP Conference Series: Materials Science and Engineering 巻 372, 号 1, 発行日 2018-04-12 |
|||||||||||
| 出版社 | ||||||||||||
| 出版社 | IOP Publishing | |||||||||||
| DOI | ||||||||||||
| 関連タイプ | isIdenticalTo | |||||||||||
| 識別子タイプ | DOI | |||||||||||
| 関連識別子 | https://doi.org/10.1088/1757-899X/372/1/012020 | |||||||||||
| ISSN | ||||||||||||
| 収録物識別子タイプ | ISSN | |||||||||||
| 収録物識別子 | 1757-899X | |||||||||||
| ISSN | ||||||||||||
| 収録物識別子タイプ | ISSN | |||||||||||
| 収録物識別子 | 1757-8981 | |||||||||||
| 著作権関連情報 | ||||||||||||
| 権利情報 | This is an author-created, un-copyedited version of an article published in IOP Conference Series: Materials Science and Engineering. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. This article is published under a CC BY licence. The Version of Record is available online at https://doi.org/10.1088/1757-899X/372/1/012020.（open access） | |||||||||||
| 出版タイプ | ||||||||||||
| 出版タイプ | VoR | |||||||||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||||||
| 査読の有無 | ||||||||||||
| 値 | yes | |||||||||||
| 研究者情報 | ||||||||||||
| URL | https://hyokadb02.jimu.kyutech.ac.jp/html/10_ja.html | |||||||||||
| 論文ID（連携） | ||||||||||||
| 値 | 10333860 | |||||||||||
| 連携ID | ||||||||||||
| 値 | 7544 | |||||||||||
