WEKO3
アイテム
Suitable pitch difference to realize anti-loosening performance for various bolts-nuts diameter
http://hdl.handle.net/10228/00007028
http://hdl.handle.net/10228/000070280a2f996e-d159-4a20-ac46-0817e3fa3666
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
1757-899X_372_1_012007.pdf (972.8 kB)
|
|
| Item type | 会議発表論文 = Conference Paper(1) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 公開日 | 2019-02-18 | |||||||||||
| 資源タイプ | ||||||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_5794 | |||||||||||
| 資源タイプ | conference paper | |||||||||||
| タイトル | ||||||||||||
| タイトル | Suitable pitch difference to realize anti-loosening performance for various bolts-nuts diameter | |||||||||||
| 言語 | en | |||||||||||
| 言語 | ||||||||||||
| 言語 | eng | |||||||||||
| 著者 |
Kubo, S
× Kubo, S× Tateishi, K× 野田, 尚昭
WEKO
3665
× 佐野, 義一× 高瀬, 康× Honda, K |
|||||||||||
| 抄録 | ||||||||||||
| 内容記述タイプ | Abstract | |||||||||||
| 内容記述 | In bolt-nut connection, the anti-loosening performance and high fatigue strength are always required with low cost to ensure the connected structure's safety. In the previous study, a suitable pitch difference between the bolt-nut was obtained as α = 33 μm for M16 JIS bolt-nut through loosening experiment and FEM simulation for tightening process. However, other bolt-nut diameters have not been considered yet. In this paper, therefore, suitable pitch difference is considered for various diameters to realize anti-loosening performance. Since bolt-nut thread geometries are different depending on the diameter, they are expressed as approximate formula. Then, loosening force and anti-loosening force are considered by varying the diameter. Finally, suitable pitch difference α suit min < α < α suit max was determined from mechanical condition. | |||||||||||
| 備考 | ||||||||||||
| 内容記述タイプ | Other | |||||||||||
| 内容記述 | 2018 International Conference on Material Strength and Applied Mechanics (MSAM 2018), 10–13 April 2018, Kitakyushu City, Japan | |||||||||||
| 書誌情報 |
IOP Conference Series: Materials Science and Engineering 巻 372, 号 1, 発行日 2018-04-11 |
|||||||||||
| 出版社 | ||||||||||||
| 出版社 | IOP Publishing | |||||||||||
| DOI | ||||||||||||
| 関連タイプ | isIdenticalTo | |||||||||||
| 識別子タイプ | DOI | |||||||||||
| 関連識別子 | https://doi.org/10.1088/1757-899X/372/1/012007 | |||||||||||
| ISSN | ||||||||||||
| 収録物識別子タイプ | EISSN | |||||||||||
| 収録物識別子 | 1757-899X | |||||||||||
| ISSN | ||||||||||||
| 収録物識別子タイプ | PISSN | |||||||||||
| 収録物識別子 | 1757-8981 | |||||||||||
| 著作権関連情報 | ||||||||||||
| 権利情報 | This is an author-created, un-copyedited version of an article published in IOP Conference Series: Materials Science and Engineering. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. This article is published under a CC BY licence. The Version of Record is available online at https://doi.org/10.1088/1757-899X/372/1/012007.（open access） | |||||||||||
| 出版タイプ | ||||||||||||
| 出版タイプ | VoR | |||||||||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||||||
| 査読の有無 | ||||||||||||
| 値 | yes | |||||||||||
| 研究者情報 | ||||||||||||
| URL | https://hyokadb02.jimu.kyutech.ac.jp/html/10_ja.html | |||||||||||
| 論文ID（連携） | ||||||||||||
| 値 | 10333861 | |||||||||||
| 連携ID | ||||||||||||
| 値 | 7535 | |||||||||||
